3D CRAFT HOUSE - Riviera Scooter
https://3dcrafthouse.net/models/riviera-scooter

Total parts: 103  (printable: 103)
Fit: tight
Plates: 5
Estimated print time: about 11.3 hours (rough estimate)

Pieces and approximate filament per colour:
  - Light Grey: 18 pcs, approx. 32.2 g
  - White: 10 pcs, approx. 8.6 g
  - Reddish Brown: 7 pcs, approx. 6.3 g
  - Blue: 51 pcs, approx. 68.9 g
  - Black: 17 pcs, approx. 13.1 g

Parts not included (complete the model with your own pieces):
  (none)

Parts too large for the plate (STL included, not in the 3MF):
  (none)

How to print:
  - Each plate is a single colour; match the colours to your AMS slots in Bambu Studio.
  - Open riviera-scooter.3mf in Bambu Studio (Bambu Lab A1, 0.4 mm nozzle).
  - Supports are off project-wide; parts that need them have tree supports enabled per object (STL names end in _supports): dish-4x4-inverted
  - The STL folders are grouped by colour; each part has a single STL and the file name gives the count (_x3 = print 3).
  - Fit presets offset studs, tubes and walls: tight = +0.10 mm, normal = 0, loose = -0.10 mm.

Licence: CC BY-NC-SA 4.0 (https://creativecommons.org/licenses/by-nc-sa/4.0/)
© 3D Craft House. Non-commercial use only; for a commercial licence write to hello@3dcrafthouse.net.
Part geometry derived from the LDraw™ Parts Library (ldraw.org), CC BY 4.0.
