3D CRAFT HOUSE - Pumpkin Lantern: Mischievous Grin
https://3dcrafthouse.net/models/pumpkin-lantern

Total parts: 45  (printable: 45)
Fit: tight
Plates: 4
Estimated print time: about 9.6 hours (rough estimate)

Pieces and approximate filament per colour:
  - Reddish Brown: 1 pcs, approx. 1.2 g
  - Black: 4 pcs, approx. 18.7 g
  - Orange: 38 pcs, approx. 93.2 g
  - Green: 2 pcs, approx. 1.0 g

Parts not included (complete the model with your own pieces):
  (none)

Parts too large for the plate (STL included, not in the 3MF):
  (none)

How to print:
  - Each plate is a single colour; match the colours to your AMS slots in Bambu Studio.
  - Open pumpkin-lantern.3mf in Bambu Studio (Bambu Lab A1, 0.4 mm nozzle).
  - Supports are off project-wide; parts that need them have tree supports enabled per object (STL names end in _supports): plant-serrated-leaf
  - The STL folders are grouped by colour; each part has a single STL and the file name gives the count (_x3 = print 3).
  - Fit presets offset studs, tubes and walls: tight = +0.10 mm, normal = 0, loose = -0.10 mm.

Licence: CC BY-NC-SA 4.0 (https://creativecommons.org/licenses/by-nc-sa/4.0/)
© 3D Craft House. Non-commercial use only; for a commercial licence write to hello@3dcrafthouse.net.
Part geometry derived from the LDraw™ Parts Library (ldraw.org), CC BY 4.0.
